Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

On my board layout, ive got these hashed red lines??

Status
Not open for further replies.

alphaai

New Member
Hello,

Ive just done a board layout, generated the files for the manufacturer from the cam processor and then gone back into the board layout and now when I check on DRC errors, ive got:

Dimension Errors and Overlap Errors.

I was drawing my parts in the schematic editor using the default 0.05 inch
and then on the board layout I switched to 0.025 inch for better control.
Could this be the reason why these errors are coming up and why ive got hashed lines.

Thanks,

Ben
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top