Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

*** No rule to make target error xc8

Status
Not open for further replies.

Makaram

Member
Interesting problem. I have a few functions using acos asin sqrt etc so I used #include <math.h>
and it compiled fine. However when I go to "Make and Program device" I get the error

make[2]: *** No rule to make target `x86)/Microchip/xc8/v1.01/include/math.h)', needed by `build/default/production/Servo_main.p1'. Stop.

Using MPLABX v1.30 and XC8 compiler v1.01
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top