Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

New Server

Status
Not open for further replies.

ElectroMaster

Administrator
Hi all,

We going to be updated the server over the next 2-3 days.

The process will be:
1. Copy all files to new server
2. Turn on new server and point to old database.
3. Change DNS
4. Disable forum and move the database to new server.
5. Enable site.

You will only be affected by number 4 and this should be only a matter of 10-20 minutes. During this time a note will be posted on the site and the actual forum will be disabled.

This upgrade will increase speed and allow for further growth.
 
Last edited:
Hi all,

We going to be updated the server over the next 2-3 days.

The process will be:
1. Copy all files to new server
2. Turn on new server and point to old database.
3. Change DNS
4. Disable forum and move the database to new server.
5. Enable site.

You will only be affected by number 4 and this should be only a matter of 10-20 minutes. During this time a note will be posted on the site and the actual forum will be disabled.

This upgrade will increase speed and allow for further growth.

Growth is good. Thanks for the fine job of supporting this forum. It rocks ;)
 
Where's actually the server located?
What's the new configuration?
I've seen the same software for a number of other websites but edited according to that. Correct? Jst asking.
 
The new server is now operational and you are now using it!

The transfer went without error!

When posting a reply I noticed that I could only select
the font and the font size, nothing else, and they don't
even work. No symbols, no smilies, nothing at all !
I guess the new server needs to be lubricated !??

on1aag.
 
When posting a reply I noticed that I could only select
the font and the font size, nothing else, and they don't
even work. No symbols, no smilies, nothing at all !
I guess the new server needs to be lubricated !??

on1aag.
It works for me.

There is a "switch editor mode" icon in the upper right corner of the screen that shows the tags rather then the result of the tags.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top