Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Need Line Follower Program

Status
Not open for further replies.
Hi,my is alex. i would like to build a line follower,but i'm a very very beginner in programing.
.................=10
.................=
9=======+========7
. ................=
. ................=
4=======+========6
...............5 =
................ =
3=======+========1
.............. 2 =
..................=
start





at no. 2 robot turn left,until no 3 robot back to no 1,in the end of no 1 it go to front and turn right at no 2,it's happen too at the no 5 and no 8,and when rhe robot until no 10 it goes back to start.i use AT89C2051,L293D driver,black track,4 sensor(comparator)=>right,back,front and left.i very2 need your help,please please please n thanks 4 your help
 
alessundr33_delvieri said:
Hi,my is alex. i would like to build a line follower,but i'm a very very beginner in programing.
.................=10
.................=
9=======+========7
. ................=
. ................=
4=======+========6
...............5 =
................ =
3=======+========1
.............. 2 =
..................=
start





at no. 2 robot turn left,until no 3 robot back to no 1,in the end of no 1 it go to front and turn right at no 2,it's happen too at the no 5 and no 8,and when rhe robot until no 10 it goes back to start.i use AT89C2051,L293D driver,black track,4 sensor(comparator)=>right,back,front and left.i very2 need your help,please please please n thanks 4 your help
I need more info..i could not even find the instruction set on the pdf from atmel..
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top