Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

need help with circut

Status
Not open for further replies.

3357

New Member
Hello, I'm fairly new to the electronics hobby but I am having allot of fun learning .
I need some help designing what I think is probably a very simple circut for someone more experienced than my self.
What I need to build is a circuit that will flash a 12 volt lamp and at the same time buzz a small piezo buzzer.. And I need that to happen every 20 to 45 seconds or so continuously while the circut is turned on ..The duration of the flash and buzz can be any where from 2 to 5 seconds give or take.
I will be using 12vdc from a car battery for power.
If someone could point me in the right direction on how to do this I would greatly appreciate your help.

I guess I would need to build some type of timer circut that basically would allow 12volts to pass to the buzzer and lamp for 2 to 5 seconds or so every 20 to 45 seconds.

Can someone give me some advise on how I would build such a circut or maybe someone knows where there may be schematics that could help me.

Thanks.............Dave
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top