Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

need help,,,, regarding caparking using 8051

Status
Not open for further replies.

shahzadiqbal

New Member
hi all
i faced problem in car parking code in c..
i have 5 empty slot.... 1 by 1 counter is decreasing.. but problem is that when counter is reached to 0... it cant stop

C:
#include<reg51.h>
#define lcdport P2
sbit senin=P1^0;
sbit senout=P1^1;
sbit door1_a=P3^4;
sbit door1_b=P3^5;
sbit door2_a=P3^6;
sbit door2_b=P3^7;
sbit rs=P3^0;
sbit rw=P3^1;
sbit en=P3^2;
sbit led=P1^7;
sbit pulse=P3^5;
int k,p;
unsigned int count=5;
unsigned int digit[2];
void entry_door_open();
void exit_door_open();
void entry_door_close();
void exit_door_close();
void exit_door_stop();
void entry_door_stop();
void lcdcmd(char);
void lcdint();
void lcddata(char);
void lcdstring(char *);
void delay(unsigned int);
void convert(unsigned int);
void ldelay(unsigned int);
          
void main()
{
        lcdint();
        led=0;
        senin=0;
        senout=0;
          lcdstring("DESIGNED BY");
        lcdcmd(0xc0);
          lcdstring("SHAHZAD IQBAL");
        lcdcmd(0xc0);
          delay(60000);
          lcdcmd(0x01);
        lcdstring("AUTOMATIC CAR");
        lcdcmd(0xc0);
        lcdstring("PARKING SYSTEM");
        delay(50000);
        lcdcmd(0x01);
        lcdstring("parking left:");
        lcdcmd(0x8d);
        convert(count);
        while(1)
        {
      
        lcdcmd(0x8d);
        led=1;
        ldelay(10);
        if(senin==1)
        {
        count=count-1;
        convert(count);
        entry_door_open();
        while(senin==1);
        delay(30000);
      
        entry_door_close();
        entry_door_stop();
        delay(5000);
       }
       else if(senout==1)
       {
        count=count+1;
        convert(count);
        exit_door_open();
        while(senout==1);
        delay(60000);
        delay(60000);
        exit_door_close();
        exit_door_stop();
        delay(5000);
        }
          }
            }
void convert(unsigned int value)
{
 led=0;    
  for(k=0;k<2;k++)
  {
        digit[k]=value%10;
        value=value/10;
        }
        for(p=1;p>=0;p--)
        {
       lcddata(digit[p]+48);
        ldelay(1);
        }
        if (count==0)
        {
        lcdcmd(0x8d);
        lcdstring("full");
        }
    
        ldelay(10);
        }
 void delay(unsigned int x)
 {
        unsigned int i;
        for(i=0;i<x;i++);
}
 void lcdint()
{
         lcdcmd(0x38);
         delay(500);
         lcdcmd(0x01);
         delay(500);
         lcdcmd(0x0c);
         delay(500);
         lcdcmd(0x80);
         delay(500);
         lcdcmd(0x0e);
         delay(500);
    }

void lcdcmd(char value)
       {
         lcdport = value;
         rw=0;
         rs=0;
         en=1;
         delay(500);
         en=0;
       }  
void lcdstring(char *p)
      {
         while(*p!='\0')
          {
            lcddata(*p);
            delay(2000);
            p++;
          }
      }
 void lcddata(char value)
{
         lcdport=value;
         rs=1;
         rw=0;
         en=1;
         delay(500);
         en=0;
}
void ldelay(unsigned int x)
          {
               unsigned int i,j;
           for (i=0;i<=x;i++)
           for (j=0;j<=1275;j++);
       }
void entry_door_open()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("opening door");
door1_a=1;
door1_b=0;
delay(60000);
delay(60000);
}
void entry_door_close()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("clossing door");
door1_a=0;
door1_b=1;
delay(60000);
delay(60000);
}
void entry_door_stop()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("door closed");
door1_a=0;
door1_b=0;
delay(60000);
delay(60000);
lcdcmd(0xc0);
lcdstring("               ");
}
void exit_door_open()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("opening door");
door2_a=0;
door2_b=1;
delay(60000);
delay(60000);
}
void exit_door_close()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("clossing door");
door2_a=1;
door2_b=0;
delay(60000);
delay(60000);
}
void exit_door_stop()
{
lcdcmd(0xc0);
lcdstring("               ");
lcdcmd(0xc0);
lcdstring("door closed");
door2_a=0;
door2_b=0;
delay(60000);
delay(60000);
lcdcmd(0xc0);
lcdstring("               ");
}
 
Last edited by a moderator:
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top