Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Need help on two circuits?

Status
Not open for further replies.

prwp_39

New Member
First: The traffic light controller consists of 5 signaling lights (RED, AMBER, GREEN and two pedestrian crossing lights: REDMAN and GREENMAN) and one normally open push-switch to start the timer.

We are using PLC Programmer to do the project.

Here are a few question i am not too sure:

1) Features
2) Functionally
3) Operation


3 Zone Alarm system

2nd: To use the Alarm System, just switch on the key switch (On/Off). The alarm system will take approx 10sec delay upon turning on by IC1A, IC1B, D2, R8 and C5. Eventually, the LED 4 will light up after the delay and system is fully armed

1) Introduction
2) Purpose
3) Features

I really hope someone can help me answer the following question. Thanks to those who help me. I really appreciate.
 
basically you are looking for someone to do all of the work for you?
the first question is pretty basic assuming you've seen a crosswalk and traffic light...
when button is pushed the light turns red which allows the pedestrians to cross for a short time.

are we supposed to know what those components are for the second one?

people here are willing to help. but you have to atleast show some effort
 
I keep searching on the internet and still can't find anything. That why i had no choice but to ask you all. Anyway hope you will help me.

The circuit diagram look very much like the one in here:
https://www.electro-tech-online.com/threads/5-zone-alarm-system.44/
This is the partlist for the second one.

S/No Item: Description: Qty: Remarks:
1 270  R1, R2, R3, R4, R5, R6, R10 07
2 220 k R7, R8 02
3 1 k R9, R11 02
4 Rectifier Bridge Rectifier 01
5 1N4148 D1, D2, D3, D4 04
6 1N4001 D5 01
7 0.1F, 16V C1, C2, C3 03
8 1F, 16V C8, C10 02
9 10F, 16V C6, C7 02
10 1000F, 25V C4,C5,C9 03
11 LED LED 1, 2, 3, 4 04
12 2N3904 NPN Transistor 01
13 N/O Switch N/O Panic Pushbutton 01
14 N/C Switch N/C Pushbutton for Zone 1, 2, 3 03
15 Switch S1 SPST Switch 01
16 12V Relay 12Vdc, 4PDT Relay 01
17 Siren 12Vdc Siren 01
18 230 Vac Lamp Intrusion Lamp 01
19 Transformer 230:12Vac, 1A Transformer 01
20 Buzzer 12Vdc Buzzer 01
21 Key Switch Bypass Entry & Alarm On/Off 02
22 1 A Fuse F1, F2 02
23 0.5 A Fuse F3 01
24 7805 5Vdc Regulator IC 01
25 7812 12Vdc Regulator IC 01
26 7408 Quad-AND Gate IC 01
27 7421 Dual-AND Gate IC 01
28 7432 Quad-OR Gate IC 01
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top