Need datasheet

[gkuyoni]

Hi guys,I am looking for the datasheet for this ic SD16932 AT-AH5ERJ. It is a 32 pin ic used in ACS-40 digital weighing scale display.please send it to my email address <email removed for protection> if you have it.

 

[danadak]

Post well focused picture of topside of part....

 

[gkuyoni]

I will

 

[gkuyoni]

Here is the ic..at the left is the company's logo, right side top are the letters: SD16932 , bottom right AT-AH5ERJ

 

[gkuyoni]

I have googled the ic to no avail.

 

[rjenkinsgb]

Can you try to get a better photo? None of those are sharp enough to see any detail of the markings or logo..

 

[rjenkinsgb]

It could be another manufacturers equivalent of the GN6932 / TA6932 LED display driver? The input signals look to be in roughly the correct area of the IC.

The datasheets are Chinese, but they give the pinout etc:

https://datasheet.lcsc.com/lcsc/2009241905_GN-Semic-GN6932_C265476.pdf

https://datasheet.lcsc.com/lcsc/2201171430_TM-Shenzhen-Titan-Micro-Elec-TA6932_C2962676.pdf

 

[gkuyoni]

Well,it's a led display driver IC for the ACS-40 digital weighing scale.any help will be appreciated.

 

[rjenkinsgb]

The 6932 LED driver is made by numerous different companies, which each give it a different prefix I've found four different ones within a few seconds of searching.

Have you compared the pinout of your IC to the ones in the data I linked to?
You have not posted a clear photo, so no one else can do that.

 

[Tony Stewart]

The photos look like a cartoon on Fuzzy Logic. If you do not have a macro focus, move back and increase lighting then crop.

 

[gkuyoni]

I will do that,thanks

 

[atferrari]

Make your picture in daylight. No flash.
Avoid the sun shining directly on the board.

Mobile phones can get marvels.

 

[Tony Stewart]

GN6932 Price & Stock | DigiPart

GN6932 Price, GN6932 Stock, Buy GN6932 from electronic components distributors. Instant result for GN6932

www.digipart.com

5pcs $0.22 /pc almost free