# need an LCD display

Status
Not open for further replies.

#### MrDEB

##### Well-Known Member
getting really lost as to which one to use for a PIC project.
some have a controller some don't say.
I get impression one with Hitachi HD44780 is pretty much standard?
found a moduel over at goldmine
Hantronix HDM64GS24Y 240 x 64 Graphics LCD Display Module-The Electronic Goldmine
that is only $8.95 everywhere else a 240x64 display is upwards of$100
planning on displaying muzzle velocity and muzzle energy in an air cannon building a chronograph using an 18F452 PIC, 2 ir LEDs and 2 ir sensors
maybe throw in a wind speed measurement?
working on code as well as finding parts.
any input or suggestions would be helpful.

#### Mr RB

##### Well-Known Member
That's a very nice display for \$8.95. Shame it needs an external 100v 400Hz EL backlight supply but you can get little modular EL suplies cheap now anyway.

#### arunb

##### Member
see here www.xmocular.com, they have a good range, I am currently using the 240x128 type LCD

Status
Not open for further replies.

Replies
1
Views
1K
Replies
21
Views
4K
Replies
0
Views
1K
Replies
7
Views
1K
Replies
2
Views
3K