I'm using the schematic in the attached image as a non-inverting buffer. I'm using that buffer multiple times throughout my circuit to switch multiple different voltages. The input to the gate of the n-mosfet will be either 3.3V or 5V.
Does an IC product exist that is basically the electrical equivalent to that type of buffer? All of the IC buffers I've found are limited in some way or another. These are my requirements:
1. Less than 1.5mA current consumption.
2. 3V Vgs-on for n-mosfet
3. 3.3V, 5V, or 10V at p-mosfet source
Basically, I have multiple source voltages that I want to be able to switch on and off with logic level signals from a microcontroller. I already have my circuit laid out using multiple iterations of 2 mosfets and 2 resistors, but I'd sure love to condense the board up a little with some ICs. Can anyone suggest where to look?
Thanks!
Does an IC product exist that is basically the electrical equivalent to that type of buffer? All of the IC buffers I've found are limited in some way or another. These are my requirements:
1. Less than 1.5mA current consumption.
2. 3V Vgs-on for n-mosfet
3. 3.3V, 5V, or 10V at p-mosfet source
Basically, I have multiple source voltages that I want to be able to switch on and off with logic level signals from a microcontroller. I already have my circuit laid out using multiple iterations of 2 mosfets and 2 resistors, but I'd sure love to condense the board up a little with some ICs. Can anyone suggest where to look?
Thanks!
Last edited: