Hello:
Was going to breadboard this schematic below, but don't have the correct Mosfets, and nothing available local. What should I be looking at when trying to substitute something equivalent. Other than the obvious such as rated the same or higher in the following categories:
Correct Polarity:
Continuous Drain Current Id:
Drain Source Voltage Vds:
Is there anything else in the specs of a MOSFET I would need to match.
Just a note, does Q1 need to be a high current as I have a 2N7000 handy. From the schematic it would only switch the fan off
https://www.discovercircuits.com/images/2012/12V%20Cooling%20Fan%20Thermostat.pdf
Was going to breadboard this schematic below, but don't have the correct Mosfets, and nothing available local. What should I be looking at when trying to substitute something equivalent. Other than the obvious such as rated the same or higher in the following categories:
Correct Polarity:
Continuous Drain Current Id:
Drain Source Voltage Vds:
Is there anything else in the specs of a MOSFET I would need to match.
Just a note, does Q1 need to be a high current as I have a 2N7000 handy. From the schematic it would only switch the fan off
https://www.discovercircuits.com/images/2012/12V%20Cooling%20Fan%20Thermostat.pdf