Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

microwave MOD Frequency & DIP Frequency

Status
Not open for further replies.

vinodquilon

Member
I have setup one Microwave testbench as shown in figure.

Modulation (MOD) frequency knob of Microwave source is been set at
mid position. Now the Frequency Meter reads a DIP Frequency of 9.34 GHz.

From Reflex Klystron MODE Study it is evident that- for all maximum
output power points, the DIP value will be same irrespective of repeller voltage.

SO,
Can I change DIP Frequency by

1. Changing MOD Frequency Knob position ?
2. Replacing Klystron Supply with Gunn Supply ?
What are the factors that decides DIP Vlaue ?
What is the difference between MOD & DIP Frequencies ?







[img=https://s2.postimage.org/m3x2w5d0/microwave.jpg]
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top