Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

LTSpice simulation of 556 ckt

Status
Not open for further replies.
The schematic is wrong and has parts missing for the second timer in the 556 IC.
 
Are you the same person who posted this same circuit on another website, or are you another student in the same class?
On the other website the original working circuit was posted that showed an important resistor to TRIG2 and RESET2 and the diode was connected differently.
 
Status
Not open for further replies.

Similar threads

N
  • Question
How to check the stability analysis of complex opamp circuit in Ltspice
Replies
2
Views
862
Roff
Roff
T
  • Question
End of discharge voltage for "refreshing" of NiMH cells
Replies
10
Views
1K
Tony Stewart
Tony Stewart
N
  • Question
Significance of resistance of the wireless power transmitter coil at resonance frequency
Replies
2
Views
727
danadak
danadak
D
Failure of polypropylene motor-run capacitors
Replies
6
Views
908
MaxHeadRoom78
MaxHeadRoom78
Externet
  • Question
Directionality of ferrite rod antennas...
Replies
4
Views
1K
JimB
JimB

Latest threads

New Articles From Microcontroller Tips

Back
Top