Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Low Noise Low Freq. Amp.

Status
Not open for further replies.

alisarhangpour

New Member
Hello,
I need a very very robust voltage amplifier,using on the shelf parts, which must be very immune to noise, since it'll be used in a high power UPS system, amplifying 0-100mV to 0-5V. It's not to be amplifying high freq. voltages so the bandwidth is not important.
Thanx a lot in advance
 
Your question is vague to the point of being useless!.

You need to provide FAR more detail, preferably with circuits of the two units it's going to connect together (and why?).

But essentially, an opamp set as non-inverting with a gain of 50 may well be all you need?.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top