Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

level

Status
Not open for further replies.

chandu13

New Member
Hi

Iam doing water level controller using 89C51 .In this I have to control the water taps According to the level of the water in the tank.

How to measure the level of water (full tank or empty tank) .

Please proved me related material for this one.

Thanks

Regards

chandu
 
hi chandu,

If you just want to measure the water levels when the tank is almost empty and again when its full, to control a water tank fill valve then:

Use two floats with microswitches, one float will operate the valve to open the valve and the other float will operate a microswitch when the tank is full, to close the valve.

Wire the microswitches in series, so they switch in the correct sense, for full and empty.

Regards
EricG
 
Hi

Thanks for the reply

I can use float switch on the top of the tank.

But how I can use float switch in side or bottom of the water.

Please post me one diagram or project related with float micro switches.

Regards,

chandu
 
hi chandu,

Attachment as requested.

EricG
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top