Ok so I' changing my 12V incandescent bulbs to LED's it has a total of 4 anyways.. I already did two of them however one thing is confusing to me is this..
the circuit seems to already have a 70 ohm resistor in place and a possible 330 Ohm in place but Not sure..
anyways what happen is they don't light when on but both Led's will flash when first turned on and that's all that happens.
You can see in this video I made this morning.
YouTube - Orange LEDs
the circuit seems to already have a 70 ohm resistor in place and a possible 330 Ohm in place but Not sure..
anyways what happen is they don't light when on but both Led's will flash when first turned on and that's all that happens.
You can see in this video I made this morning.
YouTube - Orange LEDs