Hello, I have some 12v LED lamps, on the data sheet it says:
Working current IF = 20mA
but it also says pulse forward current IFP = 150mA Pulse max width = 10ms
I was going to use 8 of these in parralel off of a transistor, but the max IC is 800 mA. I am only pulsing at 100ms min going up to 1 second max.
Will this maximum pulse current come into play here when turning the LEDs on? or will it just be the rated 20mA?
Help very much appreciated.
Thanks
Working current IF = 20mA
but it also says pulse forward current IFP = 150mA Pulse max width = 10ms
I was going to use 8 of these in parralel off of a transistor, but the max IC is 800 mA. I am only pulsing at 100ms min going up to 1 second max.
Will this maximum pulse current come into play here when turning the LEDs on? or will it just be the rated 20mA?
Help very much appreciated.
Thanks