please i need your help to programming (in C)
project of PIC18f4550 used LDR sensor to control the blind(window) open or closed using DC motor
see this link where the schematic draw for this project
i didn't studied the microcontroller
so i hope you help in programming the project
Big pic for such a little job. You don't need a 48 Mhz crystal 20 would be fine. You'll have big problems with a 48 Mhz crystal
if you can't make a proper PCB for this. And a 18f4550 can't use a 48 mhz crystal any way it uses a 20 and Pll to get 48 mhz
But you don't need that if your not using USB.
I have a program that would do this but it's in Swordfish Basic