Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

LCD won't play right

Status
Not open for further replies.
What I see so far is that MrDEB has:
  • Found that Swordfish BASIC is the only compiler he can write code with
  • Tried several LCD modules and found a bad module
  • Speculated that the wiring of his hardware may have "issues"
  • Changed to a different hardware target
  • Change to other firmware
  • Found that characters now are displayed on the LCD module
Seems that MrDEB has what he needs so perhaps this thread is done.
I had hopes it would go the distance.
 
What I see so far is that MrDEB has:
  • Found that Swordfish BASIC is the only compiler he can write code with
  • Tried several LCD modules and found a bad module
  • Speculated that the wiring of his hardware may have "issues"
  • Changed to a different hardware target
  • Change to other firmware
  • Found that characters now are displayed on the LCD module
Seems that MrDEB has what he needs so perhaps this thread is done.
I had hopes it would go the distance.
I wish you'd leave him alone...
 
I wish you'd leave him alone...
No intent to provoke MrDEB and apologize if I have.

My only purpose is to offer what help I can.

I can see that you are trying to help on his other thread; "WOW!! been awhile but $$$"
So he may look at the PIC18F45K22. Hope Swordfish BASIC supports it.
 
Last edited:
I discovered that I still have issues so this thread may go farther.
Will experiment today to find out why's and what's.
I printed out a working code as well as one that won't display on the LCD.
I also discovered that my working code has a syntax but will compile anyway.
Most of the issues here is due to the internal osc which will be addressed when the crystals get here.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top