Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

L298 Back EMF

Status
Not open for further replies.
sorry if i making any mistake...........

if the output max high is 2.7v & the output max low is 2.3v............so how can i drive a dc motor that takes 6v or 12v for operation???

i also didnt understand the max loss 5.0v case.

sorry for the typing mistake........pin 15 is getting 3.0mv.


connecting the motors/without connecting the motors................... i am not getting any outputs
 
Last edited:
Status
Not open for further replies.

Similar threads

G
5 second record and 5 second play back. Memory?
Replies
4
Views
2K
Tony Stewart
Tony Stewart
G
Accidently plugged 19vdc PS into a 12vdc back up hard drive.
2 3
Replies
48
Views
7K
Reloadron
Reloadron
H
  • Question
Back calculating the input from output signal chain with an isolated amplifier and opamp
Replies
7
Views
2K
rjenkinsgb
rjenkinsgb
throbscottle
Tandy's back!
Replies
8
Views
2K
DaveC53
D
A
  • Question
Buck controller with floating driver - 2x NMOS high-side (back to back) - prevent reverse flow
2
Replies
20
Views
4K
ACharnley
A

Latest threads

New Articles From Microcontroller Tips

Back
Top