Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Junebug: programming a 18F2550

Status
Not open for further replies.

UTMonkey

Member
Hi All,

I don't necessarily have a problem programming this chip but what I want to do is to make a copy of the PicKit2 firmware that exists on the Junebug.

No doubt there is something simple which I have overlooked!!

Thanks All.

Mark
 
It's in one of the directories installed along with MPLAB - there's the main bootloader software (explained in the Junebug manual) and then MPLAB downloads firmware to the PICKit2 processor as they are required (different firmware for different processor types).
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top