Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Is my PCB wiring correct?

Status
Not open for further replies.

Sashvat

Member
Hi guys, I have made a MC dev board out of an STM32F33K4T6 and I wanted to know if my PCB wiring is fine. The trace width I have used for this is 0.254mm. I shared another post of the same question, but for some reason, the server is down and I am not able to see the question nor able to reply to it. Please let me know if this board will power on and will I be able to run programs on it? I have attached the schematic and my PCB, I will fill the ground copper area on both top and bottom, but so that you check and verify it, I thought Ill remove it and share it with you.

Thank you
 

Attachments

  • Schematic_STM32F334K4T6-MCU-development-board_Sheet-1_20190609155611.pdf
    64 KB · Views: 205
  • PCB_STM32F334K4T6-PCB-MCU-dev-board_20190613071815.pdf
    13.5 KB · Views: 180
Do not create multiple posts of the same topic, it only causes confusion.

JimB
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top