Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

iron on sheets not ironing on

Status
Not open for further replies.

andrew2022

New Member
i have some laser iron on sheets, i have printed to the sheet but when i iron it to the pcb, only some of the traces are transfering to the pcb... (an faintly). what am i doing wrong?
 
I went thru that frustrating cycle. If you persevere, you will figure it out. The way I do it now is sandwich the PC board, transfer paper and a piece of felt cloth between sheets of glass. I use metal woodworking spring clamps with wood pads to not scratch the glass, to hold everything together. Set the oven temperature at 400 degrees F and put the sandwitch in for 10 minutes. When the sandwitch is cool, I soak the paper off in warm water.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top