Interfacing Matlab with Microcontroller

Hi Forum , i am planning to communicate with the microcontroller via serial communication and a GUI in matlab.
On microcontroller , I can make a serial terminal program that waits for data from MatLab coming through a serial port on the computer. From there I can make it so that MatLab can send ASCII strings to the microcontroller.
Someone did this work before ? or similar? because it will helps me alot to start with the GUI Matlab , or in another way , how do you recommend me to start , do you have any example ?
Thanks in advance,
Anita

Serial with Matlab is easy, there are built in functions. There is this post where a guy here has already acheived it.You will have to make the GUI according to your need though.

https://www.electro-tech-online.com/threads/matlab-to-pic-serial-communication.86172/

Even instructables.com has an example code

MATLAB to PIC serial interface

.... or you can take a look here:
UBW (USB Bit Whacker) Project

USB-connected ones for specific PICs though.

i ask for help and i hope if any one can help me ............. i made a microcontroller program and i want to apply it on matlab and connect it with matlab to be able to run it using matlab to do it's work on the prototype and draw the efficiency graph using matlab due to the change occurs in the prototype i don't know how to ....... i hope any one can help me

eslamalex said:

i ask for help and i hope if any one can help me ............. i made a microcontroller program and i want to apply it on matlab and connect it with matlab to be able to run it using matlab to do it's work on the prototype and draw the efficiency graph using matlab due to the change occurs in the prototype i don't know how to ....... i hope any one can help me

Click to expand...

Hello, welcome to ETO.

You have just "hijacked" someone else's thread, which is not allowed here. Furthermore, the thread you "hijacked" is 7 years old, which is also strongly discouraged. Do not resurrect old threads without a good reason and absolutely NEVER hijack someone else's thread.

Please start your own thread for your question.

Regards,
Matt