i have an op unity follower as d -ve terminal of my o/p stage.I want my shrt ckt currnt to be 100mA.since an op amp can sink only 10 mA hw can i increase my o/p curnt wid no negative spply available??
sorry........have attached the schematic now.
my teacher told that the transistor wont work dis way,probably the positive o/p at op amp o/p terminal wont allow the current to sink in it....
how shd i bias the transistor??
wat shd i do??
100mA is the short ckt current b/w the 2 terminals i have shown in the end.the load is to be connected b/w them.The voltage should not vary with load,as you would know.
I have also come up with another basic idea, what do you say about this??
will the transistor work properly...
100mA is the short ckt current b/w the 2 terminals i have shown in the end.the load is to be connected b/w them.The voltage should not vary with load,as you would know.
I have also come up with another basic idea, what do you say about this??
will the transistor work properly...