ID, Locate, Buy PCB Transformer

matthew amiri said:

hi

i have a small transformer sitting on my desk. It came from a frigidaire oven pcb that set temps and controls the operation,
size is 34 x 34 x 32 mm excluding the 5mm length of the pins at the bases. Takes in 120vac - output is not known.

The unit was damaged during a power surge, damaging the primary winding. There are three (3) pins on the primary winding and four (4) pins on the secondary winding.

Markings on it are:
Lei-4 0306
e154515
b-2
class 130 (b)
ls-a7632-pt
mod. No.: 35dobop-004

the primary winding is burned up (power-surge) - i can not measure and don't know the primary resistance.

I have not measured the secondary resistance, but i would assume i could, if needed,..

Any ideas where i can buy a replacement unit??

Any recommendation is appreciated,... Thanks

Click to expand...

Matthew Amiri said:

Hi

I have a small transformer sitting on my desk. It came from a Frigidaire oven PCB that set temps and controls the operation,
size is 34 x 34 x 32 mm excluding the 5mm length of the pins at the bases. Takes in 120VAC - output is not known.

The unit was damaged during a power surge, damaging the primary winding. There are three (3) pins on the Primary winding and four (4) pins on the Secondary winding.

Markings on it are:
LEI-4 0306
E154515
B-2
Class 130 (B)
LS-A7632-PT
Mod. NO.: 35DOBOP-004

The primary winding is burned up (power-surge) - I can not measure and don't know the Primary Resistance.

I have not measured the secondary resistance, but I would assume I could, if needed,..

Any ideas WHERE I can buy a replacement unit??

Any recommendation is appreciated,... Thanks

Click to expand...

Reloadron said:

This thread began about 7 years ago. I would guess there is no longer an issue?

Ron

Click to expand...

gophert said:

Umm...
Will a mod come around to lock it? And create a new thread for post #6

Click to expand...