i built a simple circuit on the app previously with a 5v source, resistor, led and ground. The only way it would work was if the resistor had a value of 1m or greater.
i just now built a simple circuit with a 4.5v source, resistor and ground. I wanted to see what different resistors did to the voltage on the opposite side. Again the circuit does not work unless the resistor is 1m or greater.
How does the circuit not work. With this app when a circuit supposedly works you see an actual current flowing through it. You get moving, colored lines instead of the solid lines that you drew with.
Am i doing something wrong or is the app whacked?