Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

I need help with a cell phone charger.

Status
Not open for further replies.

russianbadboylb

New Member
Hi all

I recently recived a LG choclete as a replacement phone since my razor broke but they have diffrent charger connections. I went over to radio shack and found the tip I need, but its made by IGo and there for I would have to buy their $30 wall adapter. Heres the thing the wall adapter that I would have to buy looks like this
http://www.the-gadgeteer.com/assets/igo-powerxtender-6.jpg thats the $30 one and the tip is $10 which I'am planning to buy this is the tip
http://www.gigaweb.com/images/medium/tp00692-0003.jpg
The tip and the adapter both connect using like 6 male conectors that would plug into the adapter like shown above. I have like 3 diffrent phone chargers which give out the exact same output and input as the LG phone and all have just 2 wires one black one black with white line. Now the LG tip from radio shack for $10 has 6 of those male connectors, I do not want to buy the wall adapter becouse I belive IGo did that just so we buy their product. How can I use my old phone charger perhaps one from my razor and cut the wire and solder it onto the $10 tip that has 6 male connectors.
can someone help please
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top