hi everyone. I'm having problem with itoa. I need to change the value of the V while the "Voltage:" reminds on the LCD. Only the value need to be change.
Code:
char MESS3[]="Voltage:";
char VOLT;
itoa(VOLT,MESS3);
W_ctr_8bit(0x80);
i=0;
while(MESS3[i])
{
W_data_8bit(MESS3[i]);
i++;
}
W_ctr_8bit(0x8C);
W_data_8bit('V');
W_ctr_8bit(0x88);