Hi again,
In this ADCON0 — A/D CONTROL REGISTER what is the mean of this:-
1. ADFM: A/D Result Formed Select bit
1 = Right justified
0 = Left justified
2.VCFG: Voltage Reference bit
1 = VREF pin
0 = VDD how to use Vref pin from where and how??
3. GO/DONE: A/D Conversion STATUS bit
1 = A/D conversion cycle in progress. Setting this bit starts an A/D conversion cycle.
This bit is automatically cleared by hardware when the A/D conversion has completed.
0 = A/D conversion completed/not in progress plaese explain bit more!
4. ADON: A/D Conversion STATUS bit
1 = A/D converter module is operating
0 = A/D converter is shut-off and consumes no operating current please explain as we are using zero so, it should be 0 = A/D converter is shut-off and consumes no operating current that mean ADC is shut down so, how can we use it?