Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

how can i connect 4 pin tact switch to the circuit

Status
Not open for further replies.

safo2t

New Member
hi

i need to know how can i connect 4 pin tact switch to the circuit

i dont know which pin should be connected


how i know the orientation and how to test it with Digital multimeter

i dont know the manufacture but i have a switch as this picture

**broken link removed**

at the bottom of the switch its written 3H ..4B in another one



on one of the switch sides there is a tiny mark as short line
 
Each side is a pair of contacts common to each other. Example looking at the picture the two pins closest the front are likely common to each other. I should point out that in some cases two pins are NC (No Connection) and just used for mounting security). Beyond that there isn't much to know. You have a meter.

Ron
 
Last edited:
Are you asking "how do I use an Ohmmeter"?
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top