riazhaniff
New Member
Hello
I am trying to control a 12V accessory in my car via a remote switch (the aux button on my car alarm)
I figured one way to do it would be to use a T flip flop and a power mosfet, but im not quite sure how to design the circuit.
i have the SN74LS107AN IC and the FDP6030BL Power Mosfet (over rated) and my signal from the AUX pulse is 12V 1.2 A
I tried using a Relay at first but my AUX signal only sends a single 1 second pulse so the accessory only stays on for a second and then turns off!
any help would be greatly appreciated!
I am trying to control a 12V accessory in my car via a remote switch (the aux button on my car alarm)
I figured one way to do it would be to use a T flip flop and a power mosfet, but im not quite sure how to design the circuit.
i have the SN74LS107AN IC and the FDP6030BL Power Mosfet (over rated) and my signal from the AUX pulse is 12V 1.2 A
I tried using a Relay at first but my AUX signal only sends a single 1 second pulse so the accessory only stays on for a second and then turns off!
any help would be greatly appreciated!