Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

help making pcb on simple circuit

Status
Not open for further replies.
Is stripboard enough for you? You just need to cut some of the traces and wire it up.
 
look at this **broken link removed**
the boards you buy have the stripes from one side to another, but you need to cut them in half like under IC1 so you don't short the pins but get nice way of connecting other components.
 
Go to Google.
Choose images.
Enter veroboard.

You will see many pictures.
 
looks complex i think im just use a board wiht all the holes in it from radio shack lol

That's actually a really good way of doing it and a good place to buy the boards. Get the kind with the little copper pads around each hole - that kind of "perf board" is cheaper at Radio Shack than most other places I've found. Use "Wire Wrap" wire (also available at RS) and go point-to-point. The reason Wire Wrap is the thing to use is that the insulation doesn't melt back so much, and the wire is a very fine gauge.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top