Help for use PWM signals with opposite phase and dead time

Status
Not open for further replies.

POWERMAN

New Member
Hello,

I would like to generated 2 PWM with opposite phase for driving a push-pull transformer.
I use PIC18F8722 for the first time, usually it's 16F877, but for this project it's smaller.
For run 2 PWM i have understand how, but not yet for generated dead times...
Because PWM's mode are very different and much complex about 16F8xx.

Somebody has already used this µC, and maybe build some routines around this concept?

If you have some ideas for starting my project, i thank you by advance.
Regards.
Donald.
 
If you are familiar with the 16F877 then I would suggest looking at the 16F887 as this has the same enhanced PWM module as the 18 series chips.

Mike.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…