help for file asm

[seti75]

Hello

I ais realized the alarm of this site - >

https://www.electro-tech-online.com/custompdfs/2009/08/riaszto.pdf

**broken link removed**

I'achieve this alarm
is what someone can file amended asm for the alarm also works after the first detection?
standards are different in France

thanks

the problem ---->
now after first detection alarm ---> standby

my alarm
YouTube - ALARM F

 

[Pommie]

I'm not sure what you are asking but think you want the alarm to trigger every time there is an intrusion. If this is so then my guess would be that you would remove the lines in red,

TRIG:   btfss ALARMSTATUS,STROBE    ; has alarm already been triggered?
        bsf ALARMSTATUS,BELL        ; no, so trigger bell
        bsf ALARMSTATUS,BUZZER
        [COLOR="Red"]bsf ALARMSTATUS,STROBE[/COLOR]

        movf ALARMSTATUS,W          ; store ALARMSTATUS (but with bell off) to eeprom
        movwf STORE1
        bcf STORE1,BELL
        movlw 8
        call SETPRM
        return

AND ALSO IN

PANICSET: btfsc PORTB,PANIC    ; has RB4 called Panic interrupt ( = 0)?
        goto PSET2             ; no

        bsf ALARMSTATUS,PANIC  ; yes
        bsf ALARMSTATUS,7      ;
        bsf ALARMSTATUS,BELL   ; trigger bell etc
        bsf ALARMSTATUS,BUZZER
        [COLOR="Red"]bsf ALARMSTATUS,STROBE[/COLOR]
        movlw %00000111
        movwf PORTE

But, it's only a guess.

Mike.

 

[seti75]

excellent Pommie
Yes, I want the alarm works
always

the question is asked on the french forum
but none has been able to address this problem

by removing these 2 lines my alarm is not in stopping
, after a first alarm ?

thanks

 

[seti75]

test done with the removal of 2 lines
alarm no longer stops.
time display disappeared ?

http://www.monsterup.com/upload/124914765711.jpg

 

[be80be]

Seti75 I got me two 16f877 and tried the code from the epe magazine and the alarm works just like it shows in the magazine

 

[seti75]

thanks be80be , but

I want a different operation.
if the alarm detects a intus, it should not be stanby mode after.
alarm always detect
Alarm still if intruder

 

[blueroomelectronics]

Did you ever get it working?

 

[be80be]

Did you ever get it working?

I did lol don't know about OP

 

[blueroomelectronics]

I know you got it working.

 

[seti75]

Did you ever get it working?

yes, the editing works very well
you did not read my post since the beginning ?
thanks

PCBs and test

YouTube - alarm

I want a different operation.
if the alarm detects a intus, it should not be stanby mode after.
alarm always detect
Alarm still if intruder

 

[seti75]

I board a successful change program
Here are the results

YouTube - al sim2

thank you for your assistance !