Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Half Bridge Driver

Status
Not open for further replies.

Sceptre

New Member
i'm using 2 IR2104's to drive a H-Bridge.....the 2104's output 15v to turn on the bridge. I was just checking the circuit to make sure everything was in order, i checked the current draw between the 2104 and the H-Bridge...there is no current draw. Is this normal?

the signal goes to +15vdc but no measurable current (even on the 4mA setting) on the meter.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top