H bridge

[warossignol]

I am looking for an H bridge circuit that will handle 12v @ 10A.DC
Supply voltage is 12vDC I have some IRF540NPBF 100v single n channel Hexfet power MOSFETS Does anyone know of a P channel that would be comparable?
I have a very limited understanding of electronic circuits.
Any help would be greatly appreciated.

 

[MrAl]

Hi,

You dont have to have exact 'counterparts' with MOSFETs, and you can
find lots of different kinds on the IRF site. Do a search for International Rectifier
and you'll find lots of these parts, N and P types.
You also have to be a little careful with the timing between upper and lower,
in that you have to make sure there is a little 'dead' time between
the switching. A snubber might be required too.

 

[fsmyth]

Here is a bunch:
H-Bridge Motor Driver Examples
More at:
Motor, Coil, Relay, and LED Drivers
<als>