Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

H-bridge motor drive circuit

Status
Not open for further replies.

AMN

New Member
a PWM signal of 5V from a microcontroller is fed to a mosfet based H-bridge to drive a DC motor (10A, 24V). Dead time=5us. TTL=5ms.

What should be the output of the attached schematic?

>>are the used models of mosfet fulfilling the purpose?
>> i am unable to obtain the required current and with the inductive load i get the bizarre output

plz take a look
 
The P FETs have an Rds on of 6 ohms so you can't get 10 amps.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top