Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Whatever you're using to cover the board with has a very poor dielectric breakdown voltage apparently or is otherwise directly conductive. You have to use a proper sealant, one specifically designed to withstand high voltages and make sure it's cured/set completely before testing.
4pyros suggestion you test it under load is probably good too, the no load voltage of those things should be considerably higher than it's loaded voltage.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
