Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Flux Removal

Status
Not open for further replies.

codan

New Member
Hi All,

Is there an easy way to remove soldering flux from finished circuit boards without the use of harsh or hazardous chemicals.

Basically what i am asking, is there anything from around the house that will clean the flux off finished circuit boards.
 
Depends on the flux. Most will clean with Isopropyl Alcohol (IPA). This is more common in some regions than in others.

Many modern fluxes clean well with clean water. Most parts are designed to be waterproof, because a lot of manufacturers use water soluble flux. Some people wash boards with the dishes. The hard part here is residue from the water. In my shop, a final rinse with distilled water is required. Drying is another issue, but dry compressed air (static free of course) does that job.

Other fluxes may want acetone (from the paint store) but this is unusual. Beware, this is highly flammable and should be used outdoors only.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top