example of seroutinvert

[c_moore]

Hello everyone,

This is a great forum. Thanks to all involved in setting it up.

Now I have a question about using seroutinvert to change the logic state from true to inverted when using the serout command. Does anyone have a example? Its not really documented in the help very well. Thanks.

Charlie

 

[ericgibbs]

Hello everyone,

This is a great forum. Thanks to all involved in setting it up.

Now I have a question about using seroutinvert to change the logic state from true to inverted when using the serout command. Does anyone have a example? Its not really documented in the help very well. Thanks.

Charlie

hi Charlie,
If thats for Oshonsoft, its as shown in this image.
Note: the Software UART has been set for Inverted levels.

 

[c_moore]

Thanks Eric. That is what I needed to know.

Regards
Charlie