Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ECG system, signal distorted please help

Status
Not open for further replies.
It depends on the ECG machine. I've used many machines with these electrodes. The tab connector is a crocodile clip. **broken link removed**


OP one very basic thing that may give some improvement along with adequately shielded cables that are kept as short as feasibly possible is skin prep. A good rub of the electrode sites with isopropyl alcohol will lower skin impedance and lessen interference artifact. Adequate skin prep was the first thing drilled into me in college.

Do u know why when I have two electrodes connected it gives me something as led lights up but 3 and nothing
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top