C chandrasekaran_ka New Member Jan 4, 2010 #1 1 wire protocol Hi al, Can i give delay more than what they have mentioned in 1 wire protocol systems..ds18b20 has mentioned 1us delay.can i give 10us delay.will it cause problem Last edited: Jan 4, 2010
1 wire protocol Hi al, Can i give delay more than what they have mentioned in 1 wire protocol systems..ds18b20 has mentioned 1us delay.can i give 10us delay.will it cause problem
D Diver300 Well-Known Member Most Helpful Member Jan 27, 2010 #3 When writing a 1 or reading the time range is 1 to 15 µs, but that has to include the rise time. 10 µs should be OK. The time between bits has a minimum of 1 µs but there is no upper limit.
When writing a 1 or reading the time range is 1 to 15 µs, but that has to include the rise time. 10 µs should be OK. The time between bits has a minimum of 1 µs but there is no upper limit.
T tresca Member Jan 27, 2010 #4 I used this as a template and I havent had any problems with it https://www.electro-tech-online.com/custompdfs/2010/01/doc2579.pdf Look at page 9 and 10. This helped me out trying to figure out the timings
I used this as a template and I havent had any problems with it https://www.electro-tech-online.com/custompdfs/2010/01/doc2579.pdf Look at page 9 and 10. This helped me out trying to figure out the timings