Jyothi@Pic
New Member
Hi,
I am using PIC18F4620 IC for my project for this i have installed MCC18 compiler I have written the led blink programming.
the program is as below
#include <p18f4620.h>
#include"string.h"
#include"math.h"
But when i build the project i am getting the error as below
----------------------------------------------------------------------
Debug build of project `D:\projects\PIC18F4620\TEST_MCC18_COMPILER\PROJECT.mcp' started.
Preprocessor symbol `__DEBUG' is defined.
Fri Jan 30 12:04:25 2009
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\MCC18\bin\mcc18.exe" -p=18F4620 -sa "TEST.C" -fo="TEST.o" -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
-sa: unknown option
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `D:\projects\PIC18F4620\TEST_MCC18_COMPILER\PROJECT.mcp' failed.
Preprocessor symbol `__DEBUG' is defined.
Fri Jan 30 12:04:27 2009
----------------------------------------------------------------------
BUILD FAILED
can anybody tell me what has to be done for this
I am using PIC18F4620 IC for my project for this i have installed MCC18 compiler I have written the led blink programming.
the program is as below
#include <p18f4620.h>
#include"string.h"
#include"math.h"
Code:
void main (void)
{
unsigned long int i,a,b;
//DEBUG=0;
PORTB=0X00;
LATB=0X00;
ADCON1=0X0F;
TRISB=0x01;
PORTE =0x00;
LATE =0x00;
TRISE=0x00;
PORTD =0x00;
LATD =0x00;
TRISD = 0X00;
TRISA=0X00;
while(1)
{
PORTA=0x00;
PORTD=0X00;
for(i=0;i<500000;i++);
PORTA=0xff;
PORTD=0Xff;
for(i=0;i<500000;i++);
/*if(RB0==0)
{
while(RB0==1);
RA0=0;
}*/
}
}But when i build the project i am getting the error as below
----------------------------------------------------------------------
Debug build of project `D:\projects\PIC18F4620\TEST_MCC18_COMPILER\PROJECT.mcp' started.
Preprocessor symbol `__DEBUG' is defined.
Fri Jan 30 12:04:25 2009
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\MCC18\bin\mcc18.exe" -p=18F4620 -sa "TEST.C" -fo="TEST.o" -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
-sa: unknown option
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `D:\projects\PIC18F4620\TEST_MCC18_COMPILER\PROJECT.mcp' failed.
Preprocessor symbol `__DEBUG' is defined.
Fri Jan 30 12:04:27 2009
----------------------------------------------------------------------
BUILD FAILED
can anybody tell me what has to be done for this