T tonytnnelectrotech Member Jul 31, 2017 #1 Hi, I followed the attached diagram, the datasheet of 74HC137, to create a 6-to-64 decoder, But I have a doubt: The pin shown in the arrow, always connected to the STROBE signal? https://obrazki.elektroda.pl/5079304200_1501508499.jpg
Hi, I followed the attached diagram, the datasheet of 74HC137, to create a 6-to-64 decoder, But I have a doubt: The pin shown in the arrow, always connected to the STROBE signal? https://obrazki.elektroda.pl/5079304200_1501508499.jpg
Ian Rogers User Extraordinaire Forum Supporter Most Helpful Member Aug 1, 2017 #2 Do not keep creating new threads on the same topic!!! One thread is enough!!