Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

DIY Solderstop mask

Status
Not open for further replies.

Boncuk

New Member
Hi all,

I found an interesting film about DIY solderstop mask. All texts are German.

If translation is needed I will provide the English text for each text page in the film.

Required material for the solderstop mask:

- High power (450W) laminator
- Dynamask Laminate
- negative developer (Natriumcarbonate, 10g/l at 40deg/C)
- UV exposure box
- soft brush to expedite developing (toothbrush or similar)

There are direct links to the material required in the article.

Here is the link: **broken link removed**

Greetings

Boncuk
 
Last edited:
Hello Boncuk,

>"If translation is needed I will provide the English text for each text page in the film"

can i have the translation of my homepage too?

sorry, im good in making soldermasks, but not in translating ;-)

Günter
 
Hello Günter,

hopefully you have a contact address on your homepage. If not please contact me via email.

Of course I'll be glad to help you.
Remark: Next time you make a movie get the microphone away from the adhesive tape roller.

When unreeling the tape and tearing it off it sounded like a lightning strike on my home theater. :D

Email address is posted in a PM to you.

Regards

Hans
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top