MrDEB
Well-Known Member
wanting to do this in a For NEXT LOOP but Swordfish uses only 1 demension unless I am going in wrong direction.Is this even doable??
[QUOTE
dim Channel(21) as byte
dim Channel(1) as portD.1
dim Channel(2) as portD.0
dim Channel(3) as portC.3
dim Channel(4) as portC.2
dim Channel(5) as portC.1
For x = 0 to 10
Channel(x) = 1
delayms(1000)
toggle (Channel(x)
next
][/QUOTE]
[QUOTE
dim Channel(21) as byte
dim Channel(1) as portD.1
dim Channel(2) as portD.0
dim Channel(3) as portC.3
dim Channel(4) as portC.2
dim Channel(5) as portC.1
For x = 0 to 10
Channel(x) = 1
delayms(1000)
toggle (Channel(x)
next
][/QUOTE]