• Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Digital circuits and logosoft

Status
Not open for further replies.

Sarav

New Member
HI

Anyone please help me with thislab
I need the solution asap for my grade

LAB #7 clothes dryer

Inputs:
1) door switch
2) Start button
3) Stop button
4) Clothes sensor switch
Outputs:
1) Cycle complete buzzer
2) Low heat Light
3) High heat Light
4) Door open Light
Rules of operation:
1. Clothes dryer door open, the Door open light comes on.
2. Dryer will not work if there are no clothes in the dryer.
3. The dryer cycle can only start when the start button is pressed.
4. There are only 2 ways the cycle will stop once its has started. The 2 ways are by opening the door, and pressing the stop button.
5. Once the dryer starts, the low heat cycle works for 12seconds. Immediately after the low heat cycle is complete the high heat cycle begins and stays on for 14 seconds.
6. Once the high heat cycle is complete the cycle complete buzzer will light up.
7. If the dryer is stopped it must start at the beginning of the low heat cycle.
Labs must be handed in showing Logosoft program, digital circuit and final LogoSoft program
 
Status
Not open for further replies.

Latest threads

EE World Online Articles

Loading
Top