Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Design review: Fully differential telescopic Operational amplifier.

Status
Not open for further replies.

Alex_bam

New Member
Hello,
I used Behzad Razavi's book to design a fully differential telescopic op-amp [screenshot attached]. Then I follow the same steps to design my proposed opamp, but I am not getting the desired result. Can someone point out where I'm doing mistakes?
For your reference, I have attached hand calculation and simulation screenshots. Thanks
My design specifications are: Supply voltage: Vdd=5V, Output voltage swing: 5V, Power ≤ 5mW, Gain: 500, UnCox= 151uA/V2, UpCox: 26uA/V2, Vthn=0.84V, Vthp: |1V| .
 

Attachments

  • 281929774_701876834222192_5458246276227493370_n.jpg
    281929774_701876834222192_5458246276227493370_n.jpg
    573.5 KB · Views: 209
  • 280430573_739468390572758_7130383991969742855_n.jpg
    280430573_739468390572758_7130383991969742855_n.jpg
    721.7 KB · Views: 217
  • 281729871_5468488746529287_1731736550436357233_n.jpg
    281729871_5468488746529287_1731736550436357233_n.jpg
    900.7 KB · Views: 205
  • 4.JPG
    4.JPG
    223 KB · Views: 222
  • 5.JPG
    5.JPG
    131.4 KB · Views: 216
I'm not familiar with that design, but from a quick look, VB1 and VB2 should come from voltage dividers or references??
As it is, the gate voltages look like they will be the same as those of the current source gates etc.

See the last paragraph of the text page you include; "The minimum value of VB1 ..."
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top