Design in Proteus 7

2

2001dragon

New Member

• Dec 23, 2012

• #1

Hey how do I connect power line to Vcc pin of opto/MC? There are no Vcc pins for them in schematics. If I can't do it to use auto router then I have to route them manually in ARES?

 

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• Dec 23, 2012

• #2

You can add any Vcc / Vdd... On the menu go to "Design / Configure power rails" add any voltage you need.

If they are "Hidden" you can right click the part and select "Packing tool".

Hope this helps.

 

Last edited: Dec 23, 2012

2

2001dragon

New Member

• Dec 23, 2012

• #3

The part I'm using is PC827CD, it's an opto with 8 pins, its schematic only show 4 pins (A, K, C, E). I checked "Packaging tool" but found no Vcc pin to configure. What do I do now? I need to connect Vcc pin from output of a regulator. When I used Auto Router without connecting Vcc, there is no route between regulator and Vcc pin.

 

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• Dec 23, 2012

• #4

I think you better download the datasheet... The PC827 has TWO opto-couplers inside... Pin 1,2,7 & 8 is opto 1, pins 3,4,5 & 6 is the other.

There is no Vcc... The current limiting resistors are external.

 

2

2001dragon

New Member

• Dec 23, 2012

• #5

Sorry, I forgot to explain, I use PC827 because it has 8 pins and there is not 6N136 which I need to use. So I use its footprint just to draw the PCB. How do I manually add a route from pin 8 to output pin of regulator?.

 

2

2001dragon

New Member

• Dec 23, 2012

• #6

can someone help me to draw route from pin 8 of PC827 footprint to another route (exactly is the route from output of 7815). If I can't do that with PC827, does anyone have 6N136 schematic + footprint? Thanks

 

K

kubeek

Well-Known Member

Most Helpful Member

• Dec 25, 2012

• #7

You can find the approptiate datasheets here and here.

 

2

2001dragon

New Member

• Dec 25, 2012

• #8

Thanks kubeek, I figured out that I couldn't add manual route but had to draw device and PCB package instead to make the connection.

P/S: is there anyway that I can delete all routes in a layout fast? I had to select each route and hit delete,